Water Cooled Co2 Laser Water Chiller Unit For Laser Cutter ,Cooling Laser High Quality Laser Chiller Systems

Product Detail

Water Cooled Co2 Laser Water Chiller Unit For Laser Cutter ,Cooling Laser High Quality Laser Chiller Systems

 

1. Product Water Cooled Co2 Laser Water Chiller Unit For Laser Cutter

 

Compression Refrigeration Water Cooled Co2 Laser Water Chiller Unit LD-5200 is special for medium power 100W-150W Co2 laser tube, high performance Co2 Laser Engraving Machine Water Chiller Systems.

 

One-stop automatic intelligent temperature control in different environment, user does not need to change setting due to it will automatically .Switch to appropriate operating temperature.

 

2. Product Specification of  the Water Cooled CO2 Laser Water Chiller Unit For Laser Cutter







Model	LD-5200-B   Small Laser Water Chiller
Power   Supply	AC 220-240V/50HZ
Cooling   Capacity	1800W
Compressor   Power	0.8HP
Refrigerant	R410 or  R134
Precision	±0.3?
Tank   Capacity	9L
Reducer	Capillary
Protection	Over   current protection for compressor ,flow alarm,Over temperature alarm
Pump   Power	0.55KW
Maximun   Flow	19L/min
Maximum   Pumping Lift	11M
Inlet and   Outlet	External F10mm brass   connector
Net / Gross   Weight :	35.5kg / 40.5 kg
Product   Dimension	60 x 33x 43 CM
Package   Dimension	65x38x48 CM







Alarm Function
A1	A2	A3	A4	A5
Over high room temperature	Over high water temperature	Over low water temperature	Room temperature sensor failure	Water temperature sensor failure

 




3. Product Feature CO2 Laser Water Chiller

1. Water circulating pump keeping the chiller in low operating cost and low noise level.

2. Use widely in overseas markets, enjoying extremely high occupation rate of market and reputation.

3. The temperature of the water can be controlled to be between the working environments to 10°C higher than it.

4. Perfect after-sales service. Warranty: 12 months.

5. Excellent specialization in thermolysis, splendid performance of cooled radiator.

6. High performance cost, energy saving.

7. Easy installation and operation.

8. Easily movable.

9. Economic Cooling Laser equipment









    




   

4.Product Advantage of the Cooling Laser High Quality Laser Chiller Systems.




• Specific disconnection alarm securing protection;

• High cost performance, low failure rate;

• Cool Capacity is 2000-2300W ;

• Forces circulation, 9L cooling tank capacity;

• It can extend the using life of laser tube and ensure the engraving effect better









5. Product Details of Water Cooled Co2 Laser Water Chiller Unit For Laser Cutter




Fill the water tank with purified water. Connect the water inlet of the water tank to the water outlet of the laser machine and connect the water outlet of the water tank to the water inlet of the laser machine. Connect the signal line of the water tank with that of the laser machine. Please see pictures below.












Water Temperature Control :




Water Cooled Co2 Laser Water Chiller Unit For Laser Cutter water tank can keep the water at a uniform temperature . its cooling function can keep the temperature at a certain value , which can be adjusted manually . All the parameters related to the water tank have been set as the correct value by our company before delivery . the user may refer to the parameter instruction manual of the water tank for detailed description on the parameters . it is strongly suggested that the user should not change the parameters without authorization . our company accepts no responsibility for any insolvable problems caused by the user’s unauthorized changing of parameters 









Cooling Laser High Quality Laser Chiller Systems applied to a single 120W CO2 glass laser tube, two 100W CO2 glass laser tubes or a single 50W metal laser frequency tube;

Co2 Laser Engraving Machine Chiller: Dual series Compression Refrigeration Water Cooled CO2 Laser Water Chiller Unit For Laser Cutter ,Cooling Laser High Quality Laser Chiller System.




6. Product New Design : Water Cooled CO2 Laser Water Chiller Unit